Product Introduction:
HTNY-F Portable Hi-pot Dielectric Strength Tester is an AC high voltage safety measuring instrument, widely used in electronic instruments, electronic equipment, electronic components, electrical equipment, bake-lite appliances, rubber, high voltage cables and motors and other withstand voltage tests, also suitable for household appliances withstand voltage testing.
Technical parameters:
| Test voltage |
AC 0.5 kV~5kV ±5% |
| Leakage current setting value |
AC 0.2~200(mA) arbitrary setting. |
| Leakage current setting accuracy |
±5% |
| Output waveform |
50Hz sinusoidal waveform. |
| Output power |
1000VA. |
| Time control |
1~99(s)±5% manual control∞ arbitrary preset. |
| Power supply voltage |
AC 220V±10% 50Hz±2Hz. |
| Environmental requirements |
relative humidity≤ 75%RH; Ambient temperature 0°C~40°C. |
| There is no strong electromagnetic field interference source around, no large amount of dust and corrosive gas, and good ventilation. |
| Power consumption |
Static power consumption< 30VA. |
Features:
1. The power supply of the instrument must have good grounding, otherwise, when the output of the instrument is short-circuited, the instrument shell has high voltage, and accidents will occur when people touch the shell.
2. Make the "test end" of the instrument well connected with the ground end, shell or one end of the measured object, otherwise the low end of the measured object has high voltage, and accidents may occur.
3. The user must wear insulating gloves and insulated leather pads under his feet to prevent electric shock.
4. Before turning on the power, be sure to adjust the "voltage adjustment" knob to the "position", 0"for safety, after turning on the power, you must also press the "reset" button to disconnect the output voltage and the test light does not light up.
5. Before connecting or contacting the test wire, be sure to ensure that the output voltage meter is in the "0"reset" state, and in the environment where the power supply is disturbed, please connect the measured object after shutting down.
6. When the instrument is in the start-up state or the test high voltage is not released, it must not touch the test object, the test line or the high voltage output.
7. In case of emergency, the power supply should be cut off immediately and the high-voltage test line should be unplugged.
8. The "test" lamp burns out and should be replaced immediately.
9. When the instrument is stopped from use or stored, please avoid storing it in a place with direct light, high temperature, high humidity or dust.
10. The instrument must be used in strict accordance with the operating procedures, otherwise the instrument will be damaged or dangerous will occur.
FAQ
1. Is your company a sales company or a manufacturer?
Wuhan UHV Power Technology Co.,Ltd. is an industrial and trade enterprise, with its own factory, self-produced and self-sold. We were founded in 2004 and have fifteen years of production experience. Our company has reliable production lines, test rooms and R&D centers.
2. Whether the goods are in stock, whether they can be customized, and how long the delivery time is.
After the goods have been ordered, it takes about 7 working days for production if there are no accidents.
3. Is the quality guaranteed?
In order to ensure quality, we use imported components in large quantities. After three times of quality inspection, the goods can be sent out, and the export is uniformly packed in non-fumigation wooden boxes.
4. What are the after-sales terms?
We offer free consulting service, one year warranty, and adopt various methods such as email communication, video calls, technology door-to-door, aiming to solve any after-sales problems in a timely manner.
5. What are the cooperative countries or regions?
Products have been successfully exported to the United States, Brazil, Australia, Russia, the Netherlands, Indonesia, Bangladesh, Iran, India, Saudi Arabia, Mongolia, Japan and other countries and regions. In the United States, India, Vietnam and other regions have cooperative distributors, can provide thoughtful services.
Contact us
Wuhan UHV Power Technology Co.,Ltd.
Address:Building 6, Optics Valley Optical-Mechanical Industrial Park, No.83, Gaoxin 5th Road,
East Lake High-tech Zone, Wuhan city .China 430223
){kind=link}